Multi-mode detection is achieved with two types of sensing systems. Each system is designed to give maximum detection to the various types of propulsion systems used by alien space craft. This electronic detector responds to Pulsed Mode, Static Mode, Dynamic Mode, Alternating Mode, and any combination of these Modes.

New !   This  detector has a built in event recorder system.

This unit also features an event record mode, for times when the unit is unattended. This record mode will capture an event and light the event indicator. A great feature when you are away and leave the detector unattended.

The sensitivity of this U.F.O. Detector is  adjustable so that the user can set the Detector for the best possible location conditions. ( In some areas the static and dynamic fields could possibly give a false indication if set too high.) By adjusting the sensitivity to the capture threshold at each new location, the best results can be achieved. The detection system is so sensitive that it will trigger when near active TVs, microwaves, power tools, computers, monitors, etc.  A simple way of determining the functionality of the detector is to place it in the vicinity of one of these items.

The electronic circuits use micro-power integrated circuits to maximize battery life. The unit does not need a power on/off switch, nor does it need an AC adapter, since the detector can operate one or more years continuously using a low cost 9 Volt battery.

This UFO Detector is able to sense when there is a change in the Earth's magnetic force fields caused by any UFO phenomena. When a disturbance of the type emanating from a probable UFO, The detector will flash its lights and emit a beeping sound. Depending on sensitivity setting, this detector is able to sense the field disturbance within a 25 to 200 mile radius of the object. At max sensitivity setting, the range is the greatest.          

Normal Mode 

When set to the Normal mode, the detector will be in the capture mode. When a disturbance of the type emanating from a probable UFO, the Green Light on the front panel LIGHTS. At the same time Capture Delay will Blink. The detector will also sound a Beeping Signal.

It will be out of the capture mode when the Front Panel Green Light goes OFF. The beeping sound and  Delay indicator will continue to beep and blink for about 30 seconds after the Green Light goes OFF.

Record Mode 

When set to the Record mode, the detector will wait for an event that would normally trigger the system. (The Beeper, Alert light and Delay light will be disabled.)  When a disturbance of the type emanating from a probable UFO is detected, it will turn on the event light. This light will stay on until it is manually reset.